The experts at Corion can provide solutions to your drainage problems. Our team of professionals will identify the cause of your drainage issue and work with you to provide the best solution that is tailored to your problem and budget.
Drainage Solution Types
- Dry Creek Beds
- French Drains
- Trench Drains
- Site Grading
- Reservoirs and Dry Wells
Drainage Problems and Solutions
Problem: Surface Water
Solution: Surface Drainage
Home sites with clay soils suffer problems with lingering surface water. In theory, every lot was graded to drain so that water in the backyard flows through a swale down the side yard to the curb or storm drain. The reality is that builders don’t always get their grades right and water becomes trapped, causing muddy zones in lawns and planting areas. When your designer creates the new drainage plan, it may utilize surface grading to ensure there is enough fall to drain. If there is not, another option must be found.
The French drain is an age-old drainage solution that gathers water and provides a place underground where it may take its time percolating down through dense soils. It is essentially a trench that is dug to any depth and filled with gravel and possibly a perforated drain line. Geotextiles are laid over the top of the gravel and the soil replaced. The surrounding area is graded to drain to this trench so water no longer gathers on the surface to create problems.
Solution: Underground Drainage
Where hardpan layers exist, the entire site may suffer poor drainage and standing water. This is too great a challenge for spot solutions. Insist on a site-wide grading and drainage plan with an underground system of pipes fed by drop inlets or trench drains. The advent of easy to install plastic piping makes it easier to move water off site and directly into the storm drain.
The drainage plan may prove to be the most important part of your project in areas of high rainfall such as the Pacific NW where heavy flows are common. Such drainage costs more to install, but it pays for itself time and again. Where there is no storm drain or it is inaccessible, this kind of system may flow into an underground sump. This is a large hole dug and packed with gravel where water stands until it drains away. With luck, digging of a sump punches through hardpan into more porous soils deeper down.
Problem: High Water Table
Solution: Raise it or use water-loving plants
Low lying areas with a high water table can make landscaping a real challenge. Plant roots in saturated soil during the growing season are denied oxygen, and quickly rot just like an overwatered house plant. Certain plants that originate in river bottoms and wetlands do quite well in high water landscapes. The best choices will be riparian species from local bogs, fens and swamps naturally adapted to your climate and soils. Trees from similar wetlands elsewhere in the world also make good candidates. These provide more diversity than what is native to local plant communities.
The other solution for high water table landscapes is to raise the planting areas, an expensive but effective option. Raised planter heights can vary according to what the designer wants to grow there. For trees and large shrubs, the size of such planters must be greater to keep the root crown high and dry. The root crown is a woody structure at the base of the trunk from which roots diverge out into the soil. Where planting is limited to smaller shrubs and perennials, the depth of the planter may be shallow and thus less expensive. The challenge to your designer is to balance the cost of raised beds with the benefits of her proposed planting.